top of page


Público·20 miembros

Ax88x72a Driver Windows XP

Generally, UE306 supports plug and play in Nintendo Switch, Windows 10/11/8.1 and Linux OS. Note: 1. If your product does not plug and play or cannot work well, please download and update the latest version of the driver manually.2. For Mac OS, please download and install the driver manually as well.

Ax88x72a Driver Windows XP


Generally, UE306 supports plug and play in Nintendo Switch, Windows 10/8.1 and Linux OS. Note: 1. If your product does not plug and play or cannot work well, please download and update the latest version of the driver manually.2. For Mac OS, please download and install the driver manually as well.

If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter ASIX AX88772A into the search box above and then submit. In the results, choose the best match for your PC and operating system.

Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.

I just Install W2K8 Server 64 bit on Dell 380 ,in the bigning i have problem with NIC card because no driver but i went to Dell site and i download driver for windows XP and the nice things windows server 2K8 64 bit accept the driver without any problem good luck for every one

We were unable to find drivers for your product. Try manually selecting your operating system. If your operating system is not listed then HP may not provide driver support for your product with that operating system.

  • This web page describes how to use the Linux usbnet driver,CONFIG_USB_USBNET in most Linux 2.4 (or later) kernels.This driver originally (2.4.early) focussed only onsupporting less conventional types of USB networking devices.In current Linux it's now a generalized core, supporting severalkinds of network devices running under Linux with "minidrivers",which are separate modulesthat can be as small as a pair of static data tables.One type is a host-to-host network cable.Those are good to understand, since some other devices describedhere need to be administered like those cables;Linux bridging is a useful tool tomake those two-node networks more manageable, andWindows XP includes this functionality too.

  • Linux PDAs,and other embedded systems like DOCSIS cable modems,are much the same. They act as Hosts in the networkingsense while they are "devices" in the USB sense, sothey behave like the other end of a host-to-host cable.All that's needed is theUSB-IF Communications Device Class (CDC) "Ethernet" class,or a simplified variant if the hardware can't implement CDC to spec.(Unless you listen to Microsoft, who will tell you not to usesuch vendor-neutral protocols.They think a complex and poorly documented protocol they defined,RNDIS, is better for them.)

  • Traditional Ethernet Adapters such as thehigh-speed (USB 2.0) ASIX 8817x based products.

It makes sense to have a common driver core becauseonly a handful of control and setup operations really needproduct- or class-specific code.Most of the driver handles i/o queues and USB faults,which can easily be product-neutral.And for some reason, vendors seem to dislike using standardframing in their Windows drivers, so many minidrivers needto wrap a technically-unnecessary layer of headers aroundEthernet packets for better interoperability.

Another approach to using IP over USB is to make thedevice look like a serial line or telecommunications modem,and then run PPP over those protocols.This document doesn't address those approaches, used sometimeswith USB drivers such as cdc_acm, usb-serial,and with adapters to IRDA or BlueTooth stacks.

Here's an incomplete list of devices that the usbnetdriver works with.It's incomplete because Linux doesn't need to know anythingspecific about products (correctly) implementingthe CDC Ethernet class specification.It's also incomplete because products that usespecialized chips (or which reuse otherproduct designs) may be repackaged without changing how theywork. Two devices with different brand labeling (on thebox and device) may look identical at the USB level.That often removes the need for driver updates, even forlower end devices that don't support thestandard USB-IF CDC Ethernet class.

Note that before Linux 2.6.14, the minidrivers were not split outinto their own modules. With older kernels, just "modprobe usbnet"to get everything; newer kernels modprobe the minidriver, whichdepends on usbnet to do all the USB-specific work. Device Minidriver Notes Advance USBNET cdc_subset (eTEK design) ALi M5632 (chip) cdc_subset USB 2.0 high speed; used in various products. The current Linux driver does NOT interoperate with the Win32"USB Virtual Network Adapter" driver from ALi (now Uli).(That ALI code seems to need a seven byte header thatnobody's taught Linux to use.) AnchorChips 2720 (chip) cdc_subset used in various products BAFO DirectLinq plusb (uses PL-2301) Belkin USB DirectConnect cdc_subset (eTEK design) eTEK (design) cdc_subset used in various products GeneSys GL620USB-A gl620a used in various products, including some motherboards and at least one BAFO product. the half-duplex GL620USB is NOT supported! products using it include the Inland Pro USB Quick Link Jaton USB ConNET plusb (uses PL-2302) LapLink Gold net1080 (uses NetChip 1080) NetChip 1080 (chip) net1080 used in various products Prolific PL-2301/2302 (chips) plusb used in various products; these two chipsseem to be all but identical Xircom PGUNET cdc_subset (uses AnchorChips 2720) Of those, support for the Prolific based devices is the least robust.(Likely better status handshaking would help a lot.)Seek out other options if you can.I've had the best luck with the designs used by Belkin and NetChip.

There's another interesting case that the usbnet driverhandles. You can connect your host (PC) to certain USB-enabled PDAs,cell phones, cable modems,or to any gadget that's very smart (maybe smart enough to embed Linux!)and uses one of the flavors of USB networking that this driver supports.Although you can program your PDA, it's not really a USB "host" (master),it's still "device" (slave).(Unless it supports USB OTG, a technology that's not yet widely available.)If that device talks like one of the host-to-host adapters listed above,a host won't know it's talking to a PDA that runs Linux directly. Device Minidriver Notes CDC Ethernet devices(including some cable modems) cdc_ether In Linux kernel 2.6, "usbnet" can support this standardUSB-IF class specification, replacing the older"CDCEther" or "cdc-ether" driver.Devices that embed Linux will often support this, usingthe Linux-USB Gadgetdriver stack and the "g_ether" driver, on hardware such asthe NetChip 2280 (USB 2.0 high speed). Epson based devices cdc_subset Epson provides example firmware. PXA-2xx based PDAs cdc_subset or rndis The PXA-250 and PXA-255 are used in successors toSA-1100 based products; there are other similarPXA-based products. "usbnet" talks toPDAs running standard ARM-Linux kernels with the"usb-eth" or "g_ether" drivers. SA-1100 based PDAs cdc_subset found in iPAQ, YOPY, and other PDAs using standard ARM Linux kernels; also see the resources at BLOB boot loader cdc_subset Some of the boot loaders used with embedded systemsallow the OS to be downloaded over USB usingTFTP. This is a big help when developing systemswhich don't have many I/O ports. One such bootloader is BLOB. Sharp Zaurus SL-5000D, SL-5500, SL-5600, SL-6000, A-300, B-500, C-700, C-750, C-760, C-860... cdc_subset or rndis These SA-1100 (or PXA-25x) based products don't use standard ARM Linux kernels, but usbnet talks to the gadget-side stack they use. Do NOT add the "usbdnet" driver, just get the latest "usbnet" patch if you have one of the newest Zaurus models. RNDIS based devices rndis Recent Linux kernels (2.6.14 and later) include experimentalsupport for the RNDIS protocol. Since that's the only USBnetworking protocol built into MS-Windows, it's interestingeven though it's a proprietary protocol with only incompletepublic documentation. The driver is young, but it seems towork with at least some Nokia cell phones. The cable devices perform a master-to-slave conversion anda slave-to-master conversion ... but these kinds of gadgets don't need the slave-to-master conversion, they're natural slaves!The PDA side initialization is a bit different,but the host side initialization (and most of the other informationprovided here) stays the same.And of course, the USB-enabled gadget could be running some otherOS, maybe an RTOS; it doesn't need to run Linux.It only needs to wrap network packets in one of a few ways,without many demands for control handshaking.

In addition to the "software emulated" adapter model used in smartperipherals, there are also single-purpose adapters using real hardware.In particular, the ASIX 8817x chips are used in a widevariety of high speed (480 Mbit/s) capable 10/100 Ethernet adapters.There are also 10/100/1000 versions. Device Minidriver Notes ASIX 88172, ATEN UC210T, D-Link DUB-E100, Hawking UF200, Linksys USB200M, Netgear FA120, Intellinet, ST Lab USB Ethernet, TrendNet TU2-ET100, ... asix All these are based on the same core hardware.This originally used separate driver, but thenit merged with "usbnet".Later kernels split out this minidriver intoits own module. There are also Linux-USB device drivers for ethernet adaptersthat don't use this framework.

Acerca de

¡Bienvenido al grupo! Puedes conectarte con otros miembros, ...
Página del grupo: Groups_SingleGroup
bottom of page